1. Home
  2. Installation ⚒️
  3. Mounting With Our Screw Kit 🔩

Mounting With Our Screw Kit 🔩

All of our signs come with a Screw Kit as standard. You will have a small zip lock bag that includes the appropriate amount of the following; Screws, Wall Plugs & Spacers.

Once you have confirmed that you have the correct amount of each of the items, ask someone to give you a hand and follow these steps:

  1. Find where you would like to mount your sign.
  2. Once you have found the perfect spot for your new sign mark out the centre of each of the pre-drilled holes on your sign.
  3. Drill the appropriate size hole for the wall plug provided and insert the wall plugs into the holes.
  4. Undo the bolts that are inside the spacers.
  5. Using a screwdriver, screw the spacers into the wall plugs.
  6. Then once all the spacers are on the wall in the correct place put your sign up against the wall and line up the pre-drilled holes with your spacers on the wall.
  7. Now screw the bolts into the spacers which will secure your sign to the wall.
  8. Stand back and admire your new sign!
Can’t find what you’re looking for or need more help? You can Email us at hello@neondirect.co or call us on 0800 048 7234
Updated on January 6, 2022

Was this article helpful?

Related Articles

Leave a Comment